1 sheet 3/4″ blond wood plywood.
1/4 sheet of 1/2″ plywood for the drawers.
1 box 10mm laminate flooring.
1/4″ trim cut from poplar for the edges of the plywood.
Screws, brad nails, glue, and contact cement.
Related Posts
A Simple DIY Floating Corner Desk for Brenda
I borrowed this idea from a YouTube build I viewed. It took a single sheet of 3/4″ plywood. I also…
Christmas Chair Sets
These are 2 sets of Adirondack chairs and tables that I built for my daughters Christmas 2016. They were made…
A Bit of Touchup
I decided to update the first bench I built. It was getting old anyways. Gosh, it was at least 2…
2 thoughts on “Floating Corner Desk Materials List”
Leave a Reply
You must be logged in to post a comment.
Lovely work. As soon as you are able to start work again I have a project I need made. When I move here a few weeks ago my buffet table was ruined. The top part is in tact but I need to replace the base.
It may be a while for me to get back to work. I had more damage in my shoulder than previously thought. I’m already doing therapy at home though. it’s gonna be a slow painful process. Send me a picture of what you are wanting ans I will see if it is something I can do. I don’t have much of a shop. In fact, most of my work is outdoors since my shop is too small to work in.
Thanks